Atmizoo Aer. Βγήκε (14-2 η επίσημη κυκλοφορία του).
"Love is in the Aer…*This is the Aer*The Aer is Atmizone’s first single-coil RTA with an outer diameter of 24mm. It comes as the further RnD result of the DotShell, after evolving its up / down wicking method, plus its signature design of the deck and vaporisation chamber. Add to this quite some extra features, after our intensive work on Tripod‘s and Tripod2‘s functions, that are waiting for you to find out.*The Deck*The deck of of the Aer RTA is largely based on the DotShell. The deck’s form includes the distinctive two diagonal, half tube leads that serve as cotton nests, and at the same time restrict the flow of the liquid and the chamber space as desired. Cotton wicking is achieved with wick holes placed on the ceiling of the vaporisation chamber and the inner surface of this ceiling is carved, so that the whole assembly ensures a formation with impressive results on flavours analysis and vapor production. This approach has already delivered excellent results with the DotShell, but now, with even more space, larger pan head phillips post screws and more potential, it reaches highest standards of performance, regardless of your vaping preferences (MTL, rDL, DL).*Ergonomics and functions*We have worked on the thread-less rotary mechanism of the Tripod, with twist and pull / push actions on conveniently marked points, to improve it and make it even easier on the Aer. Stop points are involved, so that the user will have to look for alignment signs as little as possible. As with the Tripod and Tripod2, you can access your deck any time you want and check your build, or even change build without dumping the liquid of your tank.Already introduced with the Tripod2, here we apply the same approach for real time configuration of the air flow right under the coil, through fixed air flow tubes. This way, the user can swap air flow tubes any time / real time, keeping the build and the liquid inside the tank absolutely intact. The air flow is set via five pin options, with air hole diameter 0.8mm/1.0mm/1.2mm/ 1.5mm/1.8mm respectively, pinned inside a D=4.0mm nest, plus through five air flow tubes with air hole diameter 2.0mm/2.5mm/3.0mm/3.5mm/4.0mm (last one also serving as pins nest). You can always skip the tubes and enjoy a perfect, airy 5.0mm Direct Lung draw.The Aer utilises a new thread-less Top Cap design, with double action. It allows refilling in an instant, as you can remove and replace the Top Cap with less than half a turn. At the same time, the remove / replace action of the Top Cap automatically controls the liquid flow close / open function. Opening the Top Cap to refill automatically shuts off liquid route to deck, while “screwing” the Top Cap back into place will restore liquid flow to open. *The Drip Tips*Two bespoke 510 drip tips come with the Aer device package, a wide and a narrow version for different vaping styles. Apart from those, you can use any 510 drip tip of your liking without exceptions.*The Release*The Aer is coming to public on Tuesday, February 14th 2023, through
atmizoo.com and our official resellers worldwide. If you like our other projects, one thing is for sure: You will love the Aer!".
2722 Απαντήσεις
709208 Εμφανίσεις
