Δεν με τρελαίνει η ιδέα του clear all. Μου αρέσει το auto complete μου Α δεν μπαίνουν και emoticons :P
ctr + shft + R για καθάρισμα της cache για όποιον δεν ξέρει..
ειπαμε δεν σβήνεις ούτε ιστορικά ουτε password ούτε τιποτα..Είπαμε Safari.
Δείγμα 1 | 10 (http://e-kapnisma.gr/index.php?action=post;topic=28948.15;last_msg=960592) | 20 |
Δείγμα 2 | 30 | 40 |
Δείγμα 3 | 100 | 200 |
Δείγμα 4 | 2400 | 2678 |
Δείγμα 152.000 | 501 | 478 |
Τρυφωνα αυτο θα ειναι το επομενο τεστ που θα κανω αλλα τωρα ειμαι εχτος και ισως το βραδυ να κανω ακομα ενα τεστΝα μας ανεβάσεις και video παρουσίαση στο κανάλι σου :) :thumpup:
Αν δεν γνώριζα τον microchip θα κάπνιζα.Τώρα το παλεύω με την εισαγωγή κώδικα.
Ανώνυμη ατμίστρια
Χωρίς τον microchip το φόρουμ θα ήταν καλύτερο.
Επώνυμος ζηλιάρης
Μόνο ο microchip γράφει a priori και a posteriori ταυτόχρονα και με χαρακτηριστική άνεση.
29 κατασκευαστές εγκεφάλων
Η παράθεση όμως δίνει άλλη βαρυγδουπότητα.Τώρα το παλεύω με την εισαγωγή κώδικα.
/*
SmallBot
version 2013.07.17.15.15
Created 2013 06 25
by Basile Laderchi www.GRobot.gr
Binary sketch size: (Arduino IDE v1.0.5 + Arduino Pro Mini 8MHz 3.3V) 7592 bytes
*/
#include <Servo.h>
#include <LiquidCrystal.h>
const int pinServo = 8;
const int pinMotor1 = 9;
const int pinMotor2 = 10;
const int pinMotor3 = 11;
const int pinMotor4 = 12;
const int pinLed = 13;
const int pinSharp = A0;
const int pinLm35 = A1;
int dist = 0;
int leftdist = 0;
int rightdist = 0;
int object = 150;
Servo servoSharp;
LiquidCrystal lcd(7, 6, 5, 4, 3, 2);
void setup () {
Serial.begin(9600);
pinMode(pinMotor1, OUTPUT);
pinMode(pinMotor2, OUTPUT);
pinMode(pinMotor3, OUTPUT);
pinMode(pinMotor4, OUTPUT);
pinMode(pinLed, OUTPUT);
lcd.begin(8, 2);
servoSharp.attach(pinServo);
servoSharp.write(90);
delay(700);
}
void loop() {
readAndDisplayTemperature();
dist = analogRead(pinSharp);
if (dist < object) {
digitalWrite(pinLed, LOW);
forward();
}
if (dist >= object) {
digitalWrite(pinLed, HIGH);
findroute();
}
}
void forward() {
digitalWrite(pinMotor1, HIGH);
digitalWrite(pinMotor2, LOW);
digitalWrite(pinMotor3, HIGH);
digitalWrite(pinMotor4, LOW);
}
void findroute() {
halt();
backward();
lookleft();
lookright();
if (leftdist < rightdist) {
turnleft();
} else {
turnright();
}
}
void backward() {
digitalWrite(pinMotor1, LOW);
digitalWrite(pinMotor2, HIGH);
digitalWrite(pinMotor3, LOW);
digitalWrite(pinMotor4, HIGH);
delay(700);
halt();
}
void halt() {
digitalWrite(pinMotor1, LOW);
digitalWrite(pinMotor2, LOW);
digitalWrite(pinMotor3, LOW);
digitalWrite(pinMotor4, LOW);
delay(500);
}
void lookleft() {
servoSharp.write(150);
delay(700);
leftdist = analogRead(pinSharp);
servoSharp.write(90);
delay(700);
}
void lookright() {
servoSharp.write(30);
delay(700);
rightdist = analogRead(pinSharp);
servoSharp.write(90);
delay(700);
}
void turnleft() {
digitalWrite(pinMotor1, HIGH);
digitalWrite(pinMotor2, LOW);
digitalWrite(pinMotor3, LOW);
digitalWrite(pinMotor4, HIGH);
delay(800);
halt();
}
void turnright() {
digitalWrite(pinMotor1, LOW);
digitalWrite(pinMotor2, HIGH);
digitalWrite(pinMotor3, HIGH);
digitalWrite(pinMotor4, LOW);
delay(800);
halt();
}
void readAndDisplayTemperature() {
int value = analogRead(pinLm35);
float millivolts = (value / 1024.0) * 5000;
float celsius = millivolts / 10;
//float fahrenheit = (celsius * 9) / 5 + 32;
lcd.setCursor(0, 1);
lcd.clear();
lcd.setCursor(0, 0);
lcd.print(celsius);
lcd.print(" C");
lcd.setCursor(0, 1);
//lcd.print(fahrenheit);
lcd.print(" GRobot");
}
Από κινητό μπαίνει κάνεις με full site εμφάνιση;Το πρόβλημα παραμένει.
Μπορεί να χρησιμοποιήσει φατσουλες στο νέο κειμενογραφο;
[url=http://e-kapnisma.gr/index.php/topic,6.msg40660.html#msg40660][b][color=green][size=1]Διαγραφή άμεσης παράθεσης[/size][/color][/b][/url]
Αν θέλω να κρατήσω και κάποιο καινούριο πλέον, νομίζω ότι πρέπει να το γράψω χειροκίνητα, καθώς δεν έχω πλέον την επιλογή να το φτιάξω σε WYSIWYG και μετά να το απενεργοποιήσω ώστε να πάρω το BBCode...